|
This laser-assisted wheel alignment system is the most common and most widely sold system of all in our range of products.The system is also the oldest in our catalogue but has been improved and updated over the years. It is no coincidence that it is this JOSAM equipment that has been exported to most countries around the world. It is simple, demands minimum maintenance and is manually operated. Additional software for Windows is available as a complement for calculations, data storage and printouts. |
|
 |
|
The JOSAM laser AM system for alignment of axles and wheels and also for distorted chassis is a quick and accurate system at low
cost.
|
|
| The JOSAM laser AM system stands
for precise wheel, axle and frame alignment at a relatively low
investment. This reliable equipment can measure the wheel angles
of trucks, coaches, semi-trailers, full-trailers, mobile cranes
and other heavy vehicles and also check the vehicle's chassis or
other frame constructions in a simple way. The system is based upon
laser technology and uses the geometric centerline as its reference.
Measuring scales are moved out from the centerline and are targeted
by a laser projector which in turn is mounted on a wheel adapter
on each side of the axle which is measured. Our most basic "laser
AM" system for toe-measurement can of course be expanded into
a sophisticated system which can measure all wheel angles as well
as frame measurement. |
Measurement data is typed
into the calculation software in a PC. It computes the results,
stores it or enables you to print it "before" and "after
adjustment" (Please click on image for an enlargement).
Further, a frame measurement version is also available. |
|
With JOSAM laser AM
we can easily verify whether or not the wheel angles are distorted
and if necessary, cure the problem. The frame can also be straightened
simultaneously as we measure it with the system.
Moreover, we can assess if all the wheels are rolling in the same
direction and parallel to the centerline of the frame. Even though
the system is an analogue system, its measurements may be calculated
and graphically presented in PC-software which also stores the data
and makes four-colour printing possible. The software. JOSAM
communicator, is available both for frame measurement and wheel
alignment. |
|
